$ vi 15-zte-mf622.rules
ACTION!=”add”, GOTO=”ZTE_End”
# Is this the ZeroCD device?
SUBSYSTEM==”usb”, SYSFS{idProduct}==”2000″,
SYSFS{idVendor}==”19d2″, GOTO=”ZTE_ZeroCD”
# Is this the actual modem?
SUBSYSTEM==”usb”, SYSFS{idProduct}==”0001″,
SYSFS{idVendor}==”19d2″, GOTO=”ZTE_Modem”
LABEL=”ZTE_ZeroCD”
# This is the ZeroCD part of the card, remove
# the usb_storage kernel module so
# it does not get treated like a storage device
RUN+=”/sbin/rmmod usb_storage”
LABEL=”ZTE_Modem”
# This is the Modem part of the card, let’s
# load usbserial with the correct vendor
# and product ID’s so we get our usb serial devices
RUN+=”/sbin/modprobe usbserial vendor=0×19d2 product=0×0001″,
# Make users belonging to the dialout group
# able to use the usb serial devices.
MODE=”660″, GROUP=”dialout”
LABEL=”ZTE_End”
simpan file tersebut di dalam direktori /etc/udev/rules.d
$ vi /etc/wvdial.conf :
[Dialer Defaults]
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init5 = AT+CGDCONT=1,”IP”,”indosatm2″
Stupid Mode = 1
Modem Type = Analog Modem
ISDN = 0
Phone = *99#
Modem = /dev/ttyUSB0
Username = user
Password = pass
Dial Command = ATDT
Baud = 460800